Machinery Info:
Albutt S220HX heavy duty sheargrab. 2.2m width. 3 hydraulic rams. 16 HARDOX fixed tines. 1.15 cu m capacity. 800kg weight. Bolt on brackets are available on request. Other standard features
- Hardox cutting blade
- Double skinned front grab
- Heavy duty thick wall box sections
- 50mm and 35mm pivot pins
- 90mm bore rams on all models
- High capacity
- 3 rams
- Central cutting blade
- Supplied with transport bolt to protect front blade when in delivery transit
- Optional filled in back plate
Specifications:
Related products
Swaledale ST604 twin axle ATV 4 sheep trailer
Tandem axle with tyres suitable for rocky / muddy conditions, will carry 4 sheep with lambs, folding internal sheep gates and lamb boxes, side opening rear mesh door, 50mm cast ball hitch
JCB 403 Compact Wheeled Loader with cab
Fully glazed cab with heater
30kph 2 speed transmission with diff lock
Hydraulic locking euro headstock
31×15.5-15 wide tyres
Single lever joystick control
Work lights and road lights
Kilworth Favourite Pan Mixer
The Favourite pan mixer is tractor 3 point linkage mounted and PTO driven as standard. Mixers are filled through the mesh grid on the top of the mixer, usually with a loader, backhoe bucket, skid steer etc. From concrete mixing to diet feed mixing for the smallholder. The mixers are fitted with a single stage gearbox and are suitable for farmers own use. Cubic capacity 0.75 (1680 Kg). Weight when full 2200kg. 80HP tractor min requirement. CAT 2 three point linkage. Manual operated rear discharge chute. Splash guard. PTO shaft with shear bolt protection. Fork slots in mixer frame. High quality steel pan.
Alo Quicke Trima MP160 4 in 1 bucket
In stock MP160 4 in 1 bucket. This multi-purpose bucket gives you unbeatable versatility and can switch freely between load and carry like a normal bucket, bottom emptying with improved emptying height, open bucket and excavate using blade, grab and finally sanding and gravelling via bottom opening. 3 size options available All models are available with Euro or Skid Steer hooks. Both the bottom and back of the bucket are made in a box design, which gives it a torsionally rigid and robust construction. The bucket has three hardened cutting edges: one at the leading edge of the bucket, one at the back edge and one in the digger blade’s lower section. The sides have additional strengthening in the lower section where there is maximum wear. They are also fitted with toothed interiors for maximum grip. If you want to get the highest possible work capacity from your bucket, then the Multi-Purpose Bucket is the obvious choice.